Shenzhen Yingke Hudong Technology Trade Ltd.
Main products:Mms alarm,sms alarm,gsm rtu,gprs rtu,gprs modbus rtu,gsm modem,pci modem,gps tracker,mms alarm camera,GSM remote camera
Contact Us
  • Contact Person : Mr. Hu Jianmin
  • Company Name : Shenzhen Yingke Hudong Technology Trade Ltd.
  • Tel : 86-755-26719943
  • Fax : 86-755-26719940
  • Address : Guangdong,Shenzhen,B601, Research institute of Tsinghua University, South District, Shenzhen Hi-tech & industrial Estate, NanSHan
  • Country/Region : China
  • Zip : 518057

Gsm Power Alarm system

Gsm Power Alarm system
Product Detailed
Related Categories:Alarm
Related Product Searches:Gsm Power Alarm system,High Quality,GSM ALARM, power alarm,CWT5010
Gsm power fail alarm system, send sms alarm when power fail

     CWT5010 gsm alarm system alert Gateway is designed as a cost effective remote control system alert device. It monitors up to 4 dry contacts and 4 drivable relay outputs. User-defined SMS is sent to pre-configure mobile phone numbers when a pre-defined alarm condition happens.These pre-configured mobile phone numbers can belong to technicians or engineers who are responsible in handling corresponding alarms. With the aid of this gateway, the alarm condition brings attention to in-charge personnel immediately. Besides it allows those mobile phone users to trigger any relay output by using SMS. The output can be connected with alarm indication device, such as alarm, and others.

   There is a built-in microprocessor chip running on a real-time operating system. It gives immediate response to any change in both inputs and outputs condition. A GSM modem is embedded in the gateway, user has to subscribe a SIM card for the gateway. The gateway can be installed in any location under GSM coverage.  




l       4 digital inputs,connect dry contact device

l       4 relay drivable outputs(12V-24V),drive electricity <0.2A

l       Reliable performance with built-in double watchdog

l       Automatic device condition report through SMS every 24 hour interval

l       User-defined alarm condition (normally close or open), alarm and recovery SMS message for each alarm point;Supporting drive relay output

l       Maximum of 10 mobile phone numbers can be programmable

l       Supporting voice monitoring

l       Inside temperture sensor (optional)

l       Being available for internal battery and providing power cut off alarm (optional)

l       Configuration can be done via COM port. default communication rate is 9600, default password is “000000”

Gsm Power Alarm system

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.